Tutorial: How to install Android 4.4.2 on Galaxy Note KitKat … – Phonandroid

first launched Android 4.0.4 Ice Cream Sandwich, the Galaxy Note 10.1 first name (2012 version) has received since its release only real major update which was Android 4.1.2 Jelly Bean deployed there over a year. While the 4.2 and 4.3 versions of the OS were literally zappées by Samsung, the tablet will however grant his update to Android 4.4.2 KitKat between the months of May and June.

The fact is that if you do not want to wait for the test of this firmware update to Android 4.4.2 KitKat of the Galaxy Note 10.1 Wifi GT-N8000 is leaking . So you have the option of installing with Odin following the procedure described below.

Although s ‘Whether an official firmware, this operation is at your own risk and peril. Therefore, neither Phonandroid nor the author of this article shall not be held responsible for any problem.

Prerequisites

Installing the ROM Android 4.4.2 KitKat on Galaxy Note 10.1

Unzip records previously downloaded

Odin3 v3.09

Launch

Simultaneously press the Power and Volume buttons low to restart your tablet in Download Mode

Connect your tablet to your PC and wait for the display signal blue

Add AP_N8000XXUDND5.tar.md5 AP file

field Add BL_N8000XXUDND5.tar.md5 file BL

Add MODEM_N8000XXUDND2 file field. tar.md5 field CP

Add CSC_OXA_N8000OXADND5.tar.md5 file CSC field

Check the box Re-partition is unchecked

Click Start and wait a few minutes

If you have a problem

Restart mode Recovery by simultaneously pressing the keys Power + Volume Up

Select wipe data / factory reset using volume control buttons

Restart the device

Do not hesitate to ask for help on the forum Galaxy Note 10.1

. <-! *************************** ************************************************** ** -> <-! ***************************************** ************************************************ - >